C++ library/SDK for Kite API!

trying to build it but getting error. any suggestion?
https://github.com/zerodha/cppkiteconnect
*******
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
used as include directory in directory
cppkiteconnect/examples/example3
cppkiteconnect/examples/example4/UWS_INCLUDE

used as include directory in directory cppkiteconnect/examples/example4
cppkiteconnect/tests/UWS_INCLUDE
used as include directory in directory cppkiteconnect/tests

UWS_LIB
linked by target "example3" in directory cppkiteconnect/examples/example3
linked by target "example4" in directory cppkiteconnect/examples/example4
linked by target "kWSTest" in directory cppkiteconnect/tests

Thanks a lot for the help. I found that i needed the exact version of uWebsockets v0.14. That did the trick. it's working now.

note: see reference to function template instantiation 'bool isnan(_Ty) throw()' being compiled
with
[
_Ty=int
]

_bhumit@ and team,

How do we know that last trade was buy or sell?

i printed this in my code but did not get the clear picture.
eq:972545 lprice:267.45 lastTradeno:50 totalbuyno:101130 totalsellno:100737

looked into following code kitews.hpp but it's not clear here. Looks like i have to do further calculations to figure out about last trade was buy or sell?


Tick.mode = (packetSize == 44) ? MODE_QUOTE : MODE_FULL;
Tick.lastPrice = _getNum(packet, 4, 7) / divisor;
Tick.lastTradedQuantity = _getNum(packet, 8, 11);
Tick.averageTradePrice = _getNum(packet, 12, 15) / divisor;
Tick.volumeTraded = _getNum(packet, 16, 19);
Tick.totalBuyQuantity = _getNum(packet, 20, 23);
Tick.totalSellQuantity = _getNum(packet, 24, 27);
Tick.OHLC.open = _getNum(packet, 28, 31) / divisor;
Tick.OHLC.high = _getNum(packet, 32, 35) / divisor;
Tick.OHLC.low = _getNum(packet, 36, 39) / divisor;
Tick.OHLC.close = _getNum(packet, 40, 43) / divisor;

thank you @sujith for kind response. i was referring kite chart where i can see volume trades(in bar) in green and red. I refer this as last buy and sell(sorry not able to attach picture here). i needed this information for my trade.

@sujith kindly check the picture. the volume trade shows red(sell) and green(buy). is it possible to get this information via api?

@brijesin Please create a new thread, it will help people who have the same query. Otherwise, this comment gets hidden and this thread will be hijacked.

https://kite.trade/forum/discussion/9411/c-sdk-how-to-get-last-volume-buy-or-sell-info?new=1

@unalome Are you sure you've installed uwebsockets? That error means cmake cannot find it. What OS/distro are you on? Where is uwebsockets installed? Can you share the output of make install if you're on linux?
Finally, but most importantly, are you positive you have version 0.14 of uwebsockets? I think it's this. Use deps install command provided and install the package that gets downloaded in deps folder.

I'm no sure if you can check version of uWS installed. Try running `sudo make install` inside `/cppkiteconnect/deps/deps/uWebSockets-0.14.8`. If you're lucky, `v0.14` provided by deps will replace uWS you have installed.
That, however, seems unlikely. You'll most likely have to remove your installation of uWS first. Find out where uWS is installed and remove components manually. IIRC, uWS installs `uWS` include folder and a uWS library. Good luck!

`usr/lib` is usually the place where `uws.so` is expected to be found. If not there, somewhere in PATH. If you could run `make` successfully, that means that uWS was found (version checking is not supported by CMake for manually installed libraries.). The fact that you got that error while running tests leads me to believe that there is something wrong with your uWS installation. Are you sure it is the version specified? Can you delete local repo and try again, from scratch? Did you try the following command: `make && make test ARGS='-V'`? Is it possible for you to reinstall in the following way:

All that needs to be done on Ubuntu is, go into `deps/`, run `cmake .`. That'll download uWS. Extract it and then just do the standard `make && sudo make install` in uWS root dir.

I checked on my Ubuntu LTS box and ^ did the trick.

One more thing, if you are manually setting the paths, make sure you set it for `tests/CMakeLists.txt` as well.

Hi All,

I have successfully build the SDK but it fails in kite-test
Could anyone help me out

Start 2: kite-test

2: Test command: /home/shubsri93/tradeBot/cppkiteconnect-main/build/tests/kiteTest
2: Test timeout computed to be: 1500
2: Running main() from /home/shubsri93/tradeBot/cppkiteconnect-main/deps/deps/googletest-release-1.10.0/googletest/src/gtest_main.cc
2: [==========] Running 40 tests from 1 test suite.
2: [----------] Global test environment set-up.
2: [----------] 40 tests from kiteTest
2: [ RUN ] kiteTest.constructorTest
2: [ OK ] kiteTest.constructorTest (1 ms)
2: [ RUN ] kiteTest.loginURLTest
2: [ OK ] kiteTest.loginURLTest (0 ms)
2: [ RUN ] kiteTest.generateSessionTest
2: [ OK ] kiteTest.generateSessionTest (1 ms)
2: [ RUN ] kiteTest.invalidateSessionTest
2: [ OK ] kiteTest.invalidateSessionTest (0 ms)
2: [ RUN ] kiteTest.profile
2: /home/shubsri93/tradeBot/cppkiteconnect-main/tests/unit/kitetest.cpp:131: Failure
2: Value of: jsonFile
2: Actual: false
2: Expected: true
.
.
2: [ FAILED ] kiteTest.getSIPsTest
2: [ FAILED ] kiteTest.getSIPTest
2: [ FAILED ] kiteTest.getOrderMarginsTest
2: [ FAILED ] kiteTest.getInstrumentsTest
2: [ FAILED ] kiteTest.getMFInstrumentsTest
2:
2: 35 FAILED TESTS
2/3 Test #2: kite-test ........................***Failed 0.01 sec

.
.
67% tests passed, 1 tests failed out of 3

Total Test time (real) = 0.03 sec

The following tests FAILED:
2 - kite-test (Failed)
Errors while running CTest

@rakeshr thanks for your help, it is working now, In my mock_response there were no files. so I only download all files from github againand now it works. Once again thanks..
Also I place one cover order successfully